Reset the cash dispenser and clear the error. Recommended Action: This error code indicates that the system has recognized a document intended for the reject vault has reached the note transport sensor. Check state of notes in reject box2. If the currency is in ""fit"" condition and the error condition persists, consider replacing the note cassette or the dispensing mechanism. have a peek here
Replace the CS8 encoder slit sensor 4004B00Continuous 3 times error if note is long(once tried, twice retried)=>Separated rejection1. If error occurs when checking the CS31A (3 CST FM B/D CN3) disconnection operation, replace a sensor. 3. Replace hard disk drive 9712200Failed to write file1. Check Encoder Sensor CS8 BRKT5. https://archive.org/stream/atm_g2500/All%20Tranax%20Error%20Codes_djvu.txt
If these actions have no effect on dispenser operation, replace the dispenser mechanism. Check and reseat all belts. Check CS21A, CS21B Sensor Cable3. Remove the remaining notes and foreign objects at the position of the CS31A and CS31B sensors. 2.
Get the trace file and log files in D:\trace 2. Check settings of 4 Cassette FM Board Dip Switch (#3, #5, #6 On) 6. Error Code: 95 Description: Multiple cassettes of the same type Recommended Action: This is a multi-cassette dispenser error. 1. Atm Error Code D2511 D0078 No Account Code reported by host processor.
read more at alltechnews.org ... Hantle 1700w Error Codes NOTE: Do NOT use metal objects to clear jams, use a business card or stiff paper to poke around. Check the status of sensor and its connector 20106Command is received while doing self-test1. http://www.cordfinancial.com/support-center/atm-error-codes/nautilus-hyosung-atm-error-codes/ Reset the error.
It is feasible that this error code could be generated even if the lifts are in the up position. D2516 Error Code Call your attendant 9722068Invalid Media Name1. Reset the dispenser and try to complete a test dispense. Make sure all cables are properly connected.
Contact host processor □ D009F FS omitted (after system trace audit number) Verify all programming. you can try this out Replace the Cash Dispenser B/D 40055Timeout due to noteÕs length error passed through the CS13 during dispense operation1. Genmega Error Codes Error Code: 106 (6Ah) Description: FIFO error Recommended Action: The dispensing mechanism may have corrupt software. D0111 Error Code Rearrange notes in Cassette 3.
Check the incoming power and dispenser mechanism for proper grounding. 2. navigate here Enter the management functions and complete the print journal command. If all sensors are operation correctly, and the error persists, replace the replace the dispenser. Replenish receipt paper 2. Atm Error D1706
Test the dispenser by completing several test dispenses. Axxx4 Receipt paper is empty Replenish the paper roll. This error is of concern only if it is repeated. http://u2commerce.com/error-code/tranax-error-codes.html If this error is consistent, the printer or mainboard may require service.
Check if the remaining note sensor (CS16) is normal3. D2516 Atm Error Recommended Action: This status occurs when a note arrives at the double detect without being seen by the feed sensor. 1. Make sure the diverter moves freely. 4.
Inspect for jammed currency in the feed path and at the Exit sensor. Purge the dispenser with the PURGE command. Remove notes jammed in CDU 3. Tranax 1700 Error Codes Check if the CS3 sensor cable is disconnected (CN10 #9~10)5.
See D170x, there is no answer D2000 Phone line Busy Verify host phone number - call line with handset and check for busy signal - See D170x. Straighten and shuffle cash in the cassette. Try the reset button on the printer. this contact form If the diverter has excessive binding or appears damaged, replace the dispenser. 2.
Reinstall software 3. Check 1 Cassette specification3. You may need to remove the printer to clear jams. Initialize3.
In line filter may fix this.