Replace the dispensing mechanism. 54 Operation time-out 1. Verify the blue lever on the left side of the printer in the print position. 3. Got connected and never received ENQ within time-out period (14 Seconds). (If problem persists call Your Service Provider or Triton Tech Support) 13 BGD_DONE_GOOD No money is dispensed; screen and receipt Verify operation of the power supply. http://u2commerce.com/error-code/triton-9100-error-134.html
If triton 9100 error code 206 are considered. Ensure there is currency in the cassette. If the symptoms persist after replacing the Electonic Journal replace the CPU Module. 145 Error in reply from Electronic Journal See the Recommended Actions for Error Code 144 146 No reply Optional Fixes issues in theory seems to 8. check these guys out
It is not displayed directly to the operator or customer. Program the cassette by injecting a new cassette ID into the cassette. Verify that there are no documents jammed in the note diverter area. Put more currency in the cassette and repeat the “learn note thickness” command.
Replace the dispenser is the error persists. 366 Dispenser cassettes disabled. Inspect for a currency jam at the diverter. 2. If the problem persists; replace the CPU Module. 143 PTDF error This error code will occur only in cash dispensers running ACS terminal software. Atm Error Codes 072 Install the cassette.
Verify that the DC voltages to the dispenser are correct. Triton Atm Error Code Inspect the cable supplying DC power from the power supply to the printer. Remove and empty the reject vault. https://www.tritonatm.com/service_and_support/error_code_lookup/index.php Remove any jammed currency. 2.
Purge the dispenser using the purge command. 3. Mitsubishi Triton Error Codes This error code occurs while running the dispenser on the NMD test software and when too many notes are requested during a dispense command. Clean and verify the operation of the exit sensor. Other components that may cause this error are the main board or the dispensing mechanism. 144 No reply from the electronic journal. 1.
The cables may be defective. 3. http://triton.9100.error.code.206.winwizards.org/ This error code will be generated when the following conditions occur: 1. Atm Error Codes List If the problem persists, replace the dispensing mechanism. 136 Modem initialization failed 1. Triton Error Code 244 Open the printer support bracket and verify that there are no jams in the printer or the paper path.
This is error code will set an ìOut of Serviceî condition. http://u2commerce.com/error-code/triton-9100-atm-error-codes.html Inspect the feed path and feed sensors for jammed documents and broken components. Verify the documents are fit for dispensing. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 115 Diverter timeout on purge 1. Atm Error Code 3-da000(80)
If these actions have no effect on dispenser operation; replace the dispenser mechanism. 118 (76h) Exit sensor blocked on start of dispense or learn 1. The Triton Connect Host Computer generates the error when a terminal does not respond to a telephone call from the Triton Connect Host Computer. This error code causes an ìOut of Serviceî condition. http://u2commerce.com/error-code/triton-9100-error-code-206.html Reset the error code.
Please try the request again. Triton Error Code 616 Release the printer locking screw. Place cassettes in service. 157 Erase command to electronic journal failed 1.
Clear all errors and test the dispenser by completing several TEST DISPENSES. Clear the error. If the error clears, put the cash dispenser in service. 5. Triton Error Code 246 Telephone line may not be dedicated. (ATM is being used with another devices connected to the line. 2.
Refer to error code 535. 549 Card Reader ñ Parity error. This condition is also displayed on the configuration summary printout under ìdispenserî as a lower case a; b; c; or d for the cassette in the low currency condition. This error code will cause the cash dispenser to go ìOut of Serviceî. http://u2commerce.com/error-code/triton-9100-error-codes.html Inspect electronic journal to dispenser communication cable for damage.
Turn the AC power OFF for a few seconds and then back ON to power cycle and reset the cash dispenser. If the cables are undamaged, the main board or electronic journal may be defective 150 Status command to journal failed 1. If the diverter has excessive binding or appears damaged, replace the dispenser.2. If the cables are undamaged, the main board or electronic journal may be defective 160 Electronic journal set featured failed 1.