Reset the error the error code. If cash dispenser operates normally; it will pick from seven to fifteen notes from each cassette to calibrate the double detect to the document in each of the cassettes. If error persists; replace the dispenser mechanism. 372 Dispenser item value error Clear terminal error code. Use the NMD test software (available to Triton Certified Service Technicians) and verify the operational error code of the dispenser. 391 Dispenser sensor failure. this contact form
If the problems persist, consider replacing the dispenser. 198 Dispenser did not detect note going to stacker This error is usually associated with an empty note cassette or currency that is Release the printer locking screw. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. Inspect the printer data cable for damage. see this
Clean the dirty sensor; or replace the note transport as needed. This is error code will set an ìOut of Serviceî condition. Make sure it is seated at the main board at J15 and at the printer control board at CN6. Complete several live dispenses to ensure the dispenser is working correctly.
Remove any documents from the tote transport. Purge the dispensing mechanism with the PURGE command from the DIAGNOSTICS function. Make sure the tamper screw is secure to the SPED Module. Triton Atm Error Code 101 If the error does not repeat again; complete a live dispense to verify the note diverter moves the currency to the exit position.
Inspect electronic journal to dispenser communication cable for damage. Triton Error Code 33 Reset the cash dispenser and clear the error. Open the access panels on the note transport and remove any documents that may be in the transport path. https://www.tritonatm.com/service_and_support/error_code_lookup/index.php Test the dispenser by completing several test dispenses. 3.
Clear the error. Mitsubishi Triton Error Codes If the error clears, put the cash dispenser in service. 5. Triton Connect error. Make sure that all cables are securely fastened to their termination points.
This error code occurs when documents are requested from a cassette that is not present or is not open. http://atmms.com/ Check to make sure that cables connecting the note transport and the CMC module are not damaged. Triton Error Code 244 Instead, save the journal to an external USB storage device or download to Triton Connect. Triton Error Code 151 NMD dispenser allows for only one of each cassette ID to be installed.
Open the printer support bracket and verify that there are no jams in the printer or the paper path. weblink Suspect the main board, the TCP-IP connection device (Quad Port Board in 96XX, Docking board on RL, FT or RT) or the TCP-IP equipment. 237 TCP/IP device failed Out going commutations The journal on these machines should be printed on a regular basis (i.e. Verify that all sensors are operation correctly. Atm Error Codes List
Generated Sun, 30 Oct 2016 18:11:46 GMT by s_mf18 (squid/3.5.20) Make sure that the exit sensor is clean and operation correctly.3. Make sure the connectors are seated securely on the main board and on the electronic journal. 4. navigate here Verify that the Printer has paper in it.
Verify that main board to electronic journal and the electronic journal to dispenser cables securely seated at both ends of the cable. Triton Traverse Error Code 917 Refer to error code 535. 553 Card Reader ñ device offline. Remove jammed currency. 2.
Install the reject vault. Inspect the note transport for damage and verify that all connectors are plugged into their respective receptacles. If these actions have no effect on dispenser operation, replace the dispenser mechanism. Triton Error Code 246 Reload cassettes.
If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. Cracked or broken clips should be replaced 4. Make sure that the access panels before and after the diverter are closed and secured in place. his comment is here The cash dispenser may be turned OFF, the modem may be defective, or the telephone line may be shared with another device that connects to the line before the cash dispenser.
Make sure that the exit sensor is clean and operation correctly. 3. Other components that may cause this error are the main board or the dispensing mechanism; If the problem persists; replace the dispenser and or the main board. 129 No response from Baud rate set to high for telephone line conditions.