If these actions have no effect, replace the dispensing mechanism. 203 SPED keypad is not replying to main board Status valid only for units with SPED keypad device installed. 1. Home 1-866-787- 4866 | e-Mail | About | Contact Us | Login Products News Services & Support Partner Programs Service & Support Training Programs Warranty Programs Warranty Registration Legacy Products If the error persists in may be necessary to replace either the cassette or dispensing mechanism. 105 (69h) Insufficient notes to learn from There may be an insufficient number of notes If the currency is in “fit” condition and the error persists, consider replacing the cassette or the dispenser. 34 Mis tracked note at double detect. 35 Mistracked note at exit. this contact form
If the cables are undamaged, the main board or electronic journal may be defective 159 Electronic journal test feature failed 1. Inspect card reader cabling. If the voltages are correct, and the cables are undamaged and correctly connected, causes of this error may be a defective cable, a defective printer, printer control board or the main Make sure the reject vault is installed correctly. https://www.nasatm.com/error_codes/code/102/
Make sure the connectors are seated securely on the main board and on the electronic journal. 2. Test the dispenser by completing several test dispenses with the test dispense command. If the test dispenses are normal and the error does not show again; the cash dispenser may be returned to service. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 105 Insufficient notes to learn from There may be an insufficient number of notes in the cassette
Purge the dispenser with the PURGE command. Refer to error 522. 531 EJ SOH error. Generated Sun, 30 Oct 2016 18:02:09 GMT by s_wx1196 (squid/3.5.20) ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.9/ Connection Atm Error Code 3-da000(80) If the voltages are not within tolerance; you may need to replace the cable or power supply.
If the problem persists; replace the dispenser. 48 (30h) Reject rate exceeded The most likely cause of this error is poor quality currency or an improperly adjusted dispensing mechanism. Triton Atm Error Codes Inspect main board to electronic journal communication cable for damage. The dispenser sends this status code when a command has been successfully executed. http://www.atmdepot.com/triton-atm-error-codes/ Check data and power connections to the dispenser device.
Restart operating system. Atm Error Codes 072 Inspect the feed path and Feed sensors for jammed currency and broken components. Check the calibration value for the pressure; empty; and exit sensors. Reset the error the error code.
If it is necessary to check continuity of the cable assembly, refer to Appendix B for pin out of the cable assembly. 3. Replace the dispensing mechanism. 52 RAM error A mechanical failure has occurred. Atm Error Codes List Try to inject an ID into another cassette. Triton Atm Error Code 245 If these actions have no effect on dispenser operation; replace the dispenser mechanism. 128 Error in reply from the dispenser mechanism Inspect cable from the Backplane to the Electronic Journal to
Clear all errors and test the dispenser with a live transaction. weblink If the error persists; replace the dispenser. 46 (2Eh) Exit quantified A mechanical failure has occurred. If the status clears and the return code are normal place the cash dispenser in service. Test the dispenser by completing several test dispenses. 4. Triton Atm Error Code 151
Complete several Test Dispenses to verify correct operation. 3. If the error persists, replace the SPED keypad module. 206 SPED keypad could not perform a successful command within SPED_MAX_ATTEM PTS tries Status valid only for units with SPED keypad device Release the printer locking screw. http://u2commerce.com/error-code/triton-atm-error-code-148.html If these actions have no effect on dispenser operation; replace the dispenser mechanism. 115 (73h) Diverter timeout on purge 1.
If the error persists replace the dispensing mechanism.chanism. 126 (7Eh) Diverter moved to reject position during dispense Inspect for a note jam at the diverter. Triton Atm Error Code 101 Vibrations can cause this error. 4. Clear the jammed currency.2.
Replace cassette or Inject New Cassette ID. 500 SPED Read Error. It will be display as the hexadecimal number ì30î when running the dispenser with the NMD test software. 301 (31h) Low level in cassette. This status code will appear in the electronic journal as code 32 or 100 indicating the successful completion of a transaction. 101 2-second timeout waiting for pick. (Feed failure). Triton Error Code 139 Restart the cash dispenser.
Restart ATM. If the error persist, possible causes may be the modem or main board assembly. 193 Baud rate setting for electronic journal failed 1. Make sure the connectors are seated securely on the main board and on the electronic journal. 4. http://u2commerce.com/error-code/triton-atm-error-code-110.html Make sure there are not any documents jammed at any of note feeder exit sensors.
Generated Sun, 30 Oct 2016 18:02:09 GMT by s_wx1196 (squid/3.5.20) Purge the dispenser using the purge command. 3. The completion of a satisfactory printer self test indicates that the current Printer/Printer Control Board combination and its interconnected wiring are operating normally.