Inspect the dispensing mechanism for jammed currency at the diverter. Verify that the Reject Vault and one cassette are present in the dispenser mechanism. Replace the dispenser. 52 (34h) Ram error A mechanical failure has occurred. Verify that the cable that connects the double detect module to the CMC module is undamaged and connected at both ends. this contact form
The maximum number of notes that can be dispensed from the dispenser during a transaction is defaulted to fifty. Make sure the access panel on the bottom of the note qualifier is closed and locked in position. Inspect main board to electronic journal communication cable for damage. Clear all errors and test the dispenser by completing several test dispenses. http://www.accessatm.com/service/atm-error-codes/triton-error-codes/
Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 111 Diverter timeout Inspect for jammed currency at the diverter. Make sure the documents are fit condition. Test the dispenser by completing several test dispenses with the test dispense command.
This error occurs when the logical sequence of the commands sent to the dispenser is not the one expected by the system. If the cash dispenser operates normally put it back in service. If the test dispenses are normal and the error does not show again; the cash dispenser may be returned to service. Mitsubishi Triton Error Codes The cables may be defective. 3.
This is the status after a normal dispense. 33 (21h) Feed failure This error is usually associated with an empty cassette or currency that is in UNFIT condition. Atm Error Codes List Clear the error. 5. NMD dispenser allows for only one of each cassette ID to be installed. Make sure the tamper screw is secure to the SPED module.
Restart the cash dispenser. Atm Error Codes 072 Make sure there are not any documents jammed at any of note feeder exit sensors. Enter management functions menu and place the cassette(s) in service. 383 Dispense cassettes low (ALL). If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5.
Inspect main board to electronic journal communication cable for damage. If all sensors are operation correctly, and the error persists, replace the replace the dispenser. 42 Transport error. Triton Error Code 244 If the journal becomes, full the only way it can be cleared and have a copy of it records is to print to the receipt printer or download the journal to Triton Error Code 151 If the error clears; put the cash dispenser in service. 4.
If the error clears put the cash dispenser into service. weblink Restart the cash dispenser. Verify the blue lever on the left side of the printer in the print position. Try to inject an ID into another cassette. Atm Error Code 3-da000(80)
Make sure it is seated at the main board and at the printer control board at CN6. 5. If error code re-occurs; disable low paper checking and place the terminal back into operation. belts; gears; cables; or sensors). http://u2commerce.com/error-code/triton-atm-error-code-148.html Seat connectors or replace the power supply as needed. 2.
Verify that each cassette is placed in its designated feed channel. Triton Atm Error Code 101 Use the diagnostic functions or NMD test software to determine if a note feeder has a faulty or dirty sensor. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 114 Exit blocked during purge 1.
A mechanical error has occurred. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. Triton Error Code 246 Make sure the connectors are seated securely on the main board and on the electronic journal. 4.
If the test dispenses pass, but the error returns upon live dispenses, do dispenses with the vault door open. If the error clears; put the cash dispenser in service. 6. Verify that the DC operating voltages are correct. http://u2commerce.com/error-code/triton-atm-error-code-110.html Ensure the reject bin is empty, or that there is enough room for the rejects and test notes to fall into the reject bin.
See Error Code 101, 302 or 306 B) Excessive rejects. Verify the quality of your incoming TCP-IP connection and your TCP-IP configuration, (i.e. This error code may indicate a power loss/firmware restart has occurred at the dispenser controller and no information could be retrieved. The cash dispenser may be turned OFF; or the telephone line is shared with some other device that connects to the line before the cash dispenser.
Release the printer locking screw. Please try the request again. Remove jammed currency. 2. Clear terminal error code.
Test the dispenser by completing several test dispenses. 3. Replace the timing wheel or the timing wheel sensors if they are defective. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5 If the cables are undamaged If the error recurs; a faulty cassette; note feeder or CMC module may be cause the problem. 305(35h) Diverter Failure.
Inspect for jammed currency at the diverter. This error code is reported when an internal error occurs in the dispenser. Check the cassettes.