Inspect the dispensing mechanism for jammed currency at the exit sensor. Possible may be a processor or telephone hardware problem (If problem persists call Your Service Provider or Triton Tech Support) 4 Error in modem data No money is dispensed; screen and If the test dispenses are completed normally, and the return code are correct, clear all errors and place the cash dispenser in operation.b. Do several test dispense operations. 4. this contact form
If not, place in service using the Cassette Service menu option. Verify that the power supply is operating and the DC voltages being supplied to the main board and dispenser are correct. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 103 Thickness sensor unstable Enter the diagnostic function and complete the “learn note thickness” command. If these actions have no effect, replace the dispensing mechanism. 49 Jam at exit This status is generated when exit sensor is blocked.1 Inspect the feed path for jammed currency. click resources
Seat connectors or replace the power supply as needed. 2. Clear the error. Ensure the ATM is mounted on a hard steady surface.
Remove and refill the affected cassette using normal replenishment procedures. 303(33h) Lifts are down. Purge the dispenser with the purge command under diagnostics. This status code will appear in the electronic journal as code 32 or 100 indicating the successful completion of a transaction. 101 2-second timeout waiting for pick. (Feed failure). Triton Error Code 151 Inspect for a currency jam at the diverter. 2.
Refer to error 500. 507 SPED sequence error. Triton Atm Error Codes Refer to error code 535. 555 Card Reader ñ System timeout. Great rates with no hidden fees; ATM Merchant Systems offers long-term low processing rates you can count on paired with outstanding service and support you can trust. http://www.atmdepot.com/triton-atm-error-codes/ Verify that the diverter moves freely. 3.
Open the access panels on the note transport and remove any documents that may be in the transport path. Atm Error Codes 072 Inspect main board to electronic journal communication cable for damage. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. If these actions have no effect on dispenser operation, replace the dispenser mechanism.
Choose Clear Journal. this content Verify that there is only one of each type of cassette installed in the dispensing mechanism. 2. Atm Error Codes List Otherwise, replace the dispenser.Note, if this occurs on a Mini Mech, only during a multi note dispense, the exit sensors may have become weak. Triton Error Code 244 Make sure the connectors are seated securely on the main board and on the electronic journal. 4.
Inspect the feed path for any jammed notes. weblink If the voltages are correct, and the cables are undamaged and correctly connected, causes of this error may be a defective cable, a defective printer, printer control board or the main Seat connectors or replace the power supply as needed. 2. The system returned: (22) Invalid argument The remote host or network may be down. Atm Error Code 3-da000(80)
a. Verify that all DC voltages applied to the printer control board are correct. Test the dispensing mechanism by completing several Test Dispenses. 3. http://u2commerce.com/error-code/triton-atm-error-code-148.html If the cables are undamaged, the main board or electronic journal may be defective 163 Terminal did not answer.
Examine the timing wheel for physical defect. Triton Error Code 139 Restart operating system. Inspect the printer data cable for damage.
Verify that the Reject Vault and one cassette are present in the dispenser mechanism. Clear this error code by restarting the cash dispense or by unlocking and locking the cassettes. If the error persists, replace the dispensing mechanism. Mitsubishi Triton Error Codes Verify all connectors to the dispenser mechanism.
Clean as needed with soft brush and vacuum cleaner. 2. Inspect the printer data cable for damage. Inspect all communication cables to make sure they are not damaged and are properly connect to their termination points. http://u2commerce.com/error-code/triton-atm-error-code-110.html Enter a smaller value.
If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. Seat connectors or replace the power supply as needed. 2. If the error persists replace the dispensing mechanism.chanism. 126 (7Eh) Diverter moved to reject position during dispense Inspect for a note jam at the diverter.
Inspect for a jammed currency in the reject sensor. 2. The paper low sensor may be dirty and require cleaning. 4. Reset the error. Inspect the printer data cable for damage.
Clear the error. Refer to error 500. 520 SPED device reset. Replace the dispensing mechanism. 53 EPROM error A mechanical failure has occurred. Release the printer locking screw.
Make sure the connectors are seated securely on the main board and on the electronic journal. 2.