If the error clears, put the cash dispenser back in service. This error code will be generated when the following conditions occur: 1. Make sure that cable is connected at both ends. If these actions have no effect, replace the dispensing mechanism. 50 Interference recovery Possible damage due to static discharge1. this contact form
If the error does not occur again; put the cash dispenser in service. 4. This error code occurs while running the dispenser on the NMD test software and when too many notes are requested during a dispense command. If problems still persist, replace the dispenser mechanism and/or the note cassette. Inspect main board to electronic journal communication cable for damage.
Clear all errors and test the dispenser by completing several TEST DISPENSES. If resets are suspected, determine what could have caused the main board to reset. Reset the error.
Complete several Test Dispenses to verify correct operation. a. Verify that the power supply is operating and the DC voltages being supplied to the main board and dispenser are correct. Triton Error Code 236 Clear terminal error code.
If the cables are undamaged, the main board or electronic journal may be defective 151 Electronic journal full The electronic journal on 8-bit machines (9600, 9700, and 9100) can store as Triton Error Code 244 Inspect cables connecting the Printer Controller Module to the Printer to verify that they are not damaged and are properly seated at both ends of each cable. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. http://www.accessatm.com/service/atm-error-codes/triton-error-codes/ Clear the error.
If the error clears, put the cash dispenser in service. 4. Triton Traverse Error Code 917 Make sure the connectors are seated securely on the main board and on the electronic journal. 4. Verify that there is paper in the printer. Access ATM Partners, not competitors.
Reset the terminal and clear the error. https://twitter.com/swaggerloaf/status/581083321565868033 Clean the exit sensor using a soft brush and a vacuum cleaner. Triton Atm Error Codes If the status clears and the return code are normal place the cash dispenser in service. Triton Atm Error Code 151 Clear the error.
Open the printer and verify that there are no jams in the printer or the paper path. weblink Update to Acrobat 9.4.2 failed Error code 1646 |Adobe ... جستجو Update to Acrobat 9.4.2 failed Error code 1646 |Adobe ... نمایش سایت What does this BT TV error code If the cables are undamaged, the main board or electronic journal may be defective 163 Terminal did not answer. The main board does not see any activity on TCP-IP. 1. Triton Error Code 101
No characters were received. Reset the error. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. http://u2commerce.com/error-code/triton-atm-error-code-148.html Remove jammed currency. 2.
Complete several test dispenses. Atm Error Codes List Nautilus Hyosung ATM Machines, Triton ATM Machines, Hantle ATM Machines, and Genmega ATM Machines. If the error persists; replace the card reader. 203 SPED keypad is not replying to mainboard Error code valid only for units with SPED keypad device installed.
Inspect for jammed Currency in the feed path and at the Exit sensor. If the error clears; put the cash dispenser in service. 3. Inspect the card reader assembly. Triton Error 563 Inspect the note transport make sure all belts are on track and there is no currency jammed in the transport or exit areas.
Access the error code command to determine if any sensors in the reject channel are dirty of defective. If these actions have no effect on dispenser operation; replace the dispenser mechanism. 113 (71h) Timeout waiting for trailing edge at reject 1. Test the dispenser by completing several test dispenses with the test dispense command. http://u2commerce.com/error-code/triton-atm-error-code-110.html View Unaudited Records.
See error code 557. 562 SPED error. Purge the dispenser with the purge command under diagnostics. Inspect main board to electronic journal communication cable for damage. If the cable and connectors are good; replace the Electronic Journal Module.
Purge the dispenser with the purge command. This error code will cause an ìOut of Serviceî condition. Inspect cable from the Electronic Journal to the dispenser to be sure both ends are securely screwed in place. Purge the dispensing mechanism with the PURGE command from the DIAGNOSTICS function.
This will reset the reject event counters. 339(57h)[W] Error in throat. Determine what is causing the cassette to not stay locked in place. 4. Inspect electronic journal to dispenser communication cable for damage. If the problem persists; replace the dispenser.
Otherwise; it may be necessary to replace the dispenser. 4. Refer to error 500. 510 SPED invalid message ID. If the problem persists; replace the dispensing mechanism. 133 5 volts not present from the dispenser on carrier detect See Recommended Actions for Error Code 128 or 131 134 Exit blocked Refer to error 500. 506 SPED invalid request.
PURGE the dispensing mechanism. Inspect main board to electronic journal communication cable for damage. If the error does not occur again put the cash dispenser in service. It the status clears, place the cash dispenser in service.