Examine the timing wheel for physical defect. If the cables are undamaged, the main board or electronic journal may be defective 151 Electronic journal full The electronic journal on 8-bit machines (9600, 9700, and 9100) can store as If these actions have no effect on dispenser operation, replace the dispenser mechanism. Clear all error and purge the dispenser using the purge command. 4. http://u2commerce.com/error-code/triton-atm-error-codes-pdf.html
Inspect electronic journal to dispenser communication cable for damage. Ensure they are marked as audited. 3. Working... Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 105 Insufficient notes to learn from There may be an insufficient number of notes in the cassette
Reset the cash dispenser. Inspect for jammed currency in the feed path and at the Exit sensor. If the voltages are not within tolerance, the cable or power supply may be defective. 4. See Error Code 101, 302 or 306 B) Excessive rejects.
ATMMoneyMachine 323 views 8:31 How to Resolve a 5002 Error Code on a WRG ATM - Duration: 1:50. Other components that may cause this error are the main board or the dispensing mechanism. 134 Exit blocked as reported by status check 1. Clear the error. 5. Triton Error Code 139 Install the cassette.
Watch QueueQueueWatch QueueQueue Remove allDisconnect Loading... Triton Error Code 151 Inspect electronic journal to dispenser communication cable for damage. If the error clears, put the cash dispenser back in service. find more info Suspect the main board, the TCP-IP connection device (Quad Port Board in 96XX, Docking board on RL, FT or RT) or the TCP-IP equipment. 237 TCP/IP device failed Out going commutations
Inspect the feed path and Feed sensors for jammed currency and broken components. Triton 9100 Error Code 148 Instead, save the journal to an external USB storage device or download to Triton Connect. Cassettes are take out of service for two reasons: A) Feed failure or empty. Inspect the card reader assembly.
This is a timing wheel or timing wheel sensor error.. 1. Inspect main board to electronic journal communication cable for damage. Triton Error Code 244 Replenish paper as needed. Atm Error Codes List Access ATM Partners, not competitors.
Inspect the cassette and feed path for currency that is stuck together or jammed. 3. weblink Clean the exit sensor using a soft brush and a vacuum cleaner. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. Verify that main board to electronic journal and the electronic journal to dispenser cables securely seated at both ends of the cable. Mitsubishi Triton Error Codes
ATM ATOM 1,785 views 1:46 2003 Ford F150 5.4 liter Triton Spark Plug removal and install - do it yourself and save some cash - Duration: 13:30. If these actions have no effect, replace the dispensing mechanism. 50 Interference recovery Possible damage due to static discharge1. The cash dispenser may be turned OFF, the modem may be defective, or the telephone line may be shared with another device that connects to the line before the cash dispenser. navigate here Power down the ATM in the proper sequence.
Clear all errors and test the dispenser by completing several TEST DISPENSES. Triton Atm Error Code 101 It the status clears, place the cash dispenser in service. If the cables are undamaged, the main board or electronic journal may be defective 146 No reply from command to electronic journal 1.
Otherwise, replace the dispenser 37 Too long at exit. If the status clears and the return code are normal place the cash dispenser in service. Reset the Cash Dispenser by turning OFF the AC power switch for a few seconds and switching it back ON. Triton Error Code 246 This page uses frames, but your browser doesn't support them.
All Rights Reserved.
Inspect the cables connected to CN2, CN3, CN4, and CN5. Inspect the cable supplying DC power from the power supply to the printer. Replace the exit sensor if defective. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3.
Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 126 Diverter moved to reject position during dispense Inspect for a note jam at the diverter. Inspect the feed path and exit sensor for jammed currency and broken components. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5.