Purge the dispenser using the purge command. Clear all errors and test the dispenser by completing several TEST DISPENSES. Complete several test dispenses. Results: No money is dispensed, screen and receipt display system unavailable. navigate here
There should be no jumpers installed. 2. The cables may be defective. 3. If the test dispenses are normal and the error does not show again, the cash dispenser may be returned to service. Reset the cash dispenser by turning OFF the AC power switch for a few seconds and switching it back ON. http://www.atmdepot.com/triton-atm-error-code-101/
Remove the cassette and visually inspect for loose or disconnected connectors on both the upper and lower width sensor printed circuit boards. 3. Purge the dispensing mechanism with the PURGE command from the DIAGNOSTICS function. The transaction will be completed with the customers' receipt indicating the amount of cash actually received. Inspect the diverter area to make sure that it is not blocked and that it moves freely.
This is normally an internal terminal problem. Turn the AC power OFF for a few seconds and then back on to power cycle and reset the cash dispenser. Inspect the dispensing mechanism for jammed currency at the diverter. Triton Atm Error Code 151 Test the dispensing mechanism by completing several Test Dispenses. 3.
Inspect main board to electronic journal (EJ) communication cable for damage. Remove any jammed currency. 2. Error Code: 151 Description: Electronic Journal Full. http://www.atmexperts.com/atm_error_codes.html Make sure that all cables are securely fastened to their termination points.
Results: No money is dispensed, screen and receipt display system unavailable. Atm Error Codes 072 The corrupted system files entries can be a real threat to the well being of your computer. Inspect for jammed currency at the Diverter. Recommended Action: See the recommended action for error code 144.
Inspect the cable supplying DC power from the power supply to the printer. The cables may be defective. 3. Atm Error Codes List The Triton Error 101 error may be caused by windows system files damage. Atm Error Code 3-da000(80) Make sure the note diverter moves freely.
Test the dispensing mechanism by completing several test dispenses. check over here Inspect for jammed Currency in the feed path and at the Exit sensor. Additionally, the Triton Connect feature may be disabled at the Cash Dispenser. 164 Terminal did not return call. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. Triton Error Code 244
The most likely cause is internal communication problems within the dispenser. Clear all errors and test the dispenser by completing several TEST DISPENSES. Error Code: 320(44h)[D] Description: Reject cassette almost full. his comment is here If the voltages are correct, and the cables are undamaged and correctly connected, causes of this error may be a defective cable, a defective printer, printer control board or the main
Inspect the feed path for jammed currency. Triton Error Code 139 If no jam is located, remove the first note from the cassette. Restart the operating system.
If the currency is in "fit" condition and the error condition persists, consider replacing the note cassette or the dispensing mechanism. (Check out our Hyosung ATMs for sale & our Verify the blue lever on the left side of the printer in the print position. 3. Purge the dispenser using the PURGE command. Triton Error Code 616 Replace the timing wheel or the timing wheel sensors if they are defective.
If the cables are undamaged, the main board or electronic journal may be defective 158 Format command to electronic journal failed 1. Error Code: 190 Description: Pin Master key not configured. If it clears, initiate the learn note thickness operation. weblink If error fails to reset, or the error reoccurs in a short amount of time, consider replacing the SPED. 241 SPED Warning: Self Test error See Error Code 240 382 Dispenser
Check the cassettes. Clear the error. 2. Seat connectors or replace the power supply as needed. 2. If the requested amount cannot be dispensed, the customer will receive the cash that can be dispensed.
Restart the cash dispenser. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 5. If the error clears, put the ATM in service. 4. If these actions have no effect on dispenser operation, print a dispenser status report, scan the click count history, starting at the bottom.
Clear terminal error code. Verify the blue lever on the left side of the printer in the print position. 2. If the test dispenses pass, but the error returns upon live dispenses, do dispenses with the vault door open. Inspect the feed path and exit sensor for jammed currency and broken components.