Home > Error Code > Triton Error Codes 135

Triton Error Codes 135

Contents

Inspect the note qualifier and note transport for broken components (i.e. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. Clear the error. Replace SPED if error persists. 501 SPED invalid return record. http://u2commerce.com/error-code/triton-atm-error-codes-pdf.html

Verify that the DC voltages to the dispenser are correct. This error code may indicate a power loss/firmware restart has occurred at the dispenser controller and no information could be retrieved. If the error does not occur again put the cash dispenser in service. Contact Us online form Error Code Lookup Lookup an error code by number or by the error description. https://www.nasatm.com/error_codes/code/135/

Triton Atm Error Codes

Inspect the dispensing mechanism for jammed currency at the exit sensor. Verify that all DC voltages applied to the printer control board are correct. Make sure all access panels are closed. No money is dispensed; screen and receipt display system unavailable. (If problem persists call Your Service Provider or Triton Systems Technical Support) 3 BGD_NOANSWER No money is dispensed; screen and receipt

  • Restart the cash dispenser.
  • The cables may be defective. 3.
  • Clear the terminal error code.

Refer to error 500. 509 SPED no data. Otherwise; replace the dispenser. 3. Turn the AC power OFF for a few seconds and then back on to power cycle and reset the cash dispenser. Triton Atm Error Code 101 Inspect main board to electronic journal communication cable for damage.

Refer to error 500. 504 SPED invalid return ID. Remove jammed currency. 2. Ensure the reject bin is empty, or that there is enough room for the rejects and test notes to fall into the reject bin. http://www.atmdepot.com/triton-atm-error-codes/ Clear the error.

If the error does not occur again; put the cash dispenser in service. 4. Triton Error Code 139 Make sure the battery is seated secure in the battery holder. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 126 Diverter moved to reject position during dispense Inspect for a note jam at the diverter. Seat connectors or replace the power supply as needed. 2.

Triton Atm Error Code 245

Turn the AC power OFF for a few seconds and then back ON to power cycle and reset the cash dispenser. imp source Check dip switch settings on the printer controller board to verify they are set correctly. Triton Atm Error Codes Got connected and never received ENQ within time-out period (14 Seconds). (If problem persists call Your Service Provider or Triton Tech Support) 13 BGD_DONE_GOOD No money is dispensed; screen and receipt Atm Error Codes List If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3.

Clear the error. weblink Dispenser failed to identify the dispenser type installed. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 114 Exit blocked during purge 1. Refer to error 522. 525 EJ invalid ID. Triton Atm Error Code 151

Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 116 Motor Fault 1. Clear all errors and test the dispenser by completing several test dispenses. If replacing the modem does not correct the problem; replace the main board. 138 Print failure while printing to the receipt printer. navigate here If problems still persist, replace the dispenser mechanism and/or the note cassette.

If these actions have no effect, replace the dispensing mechanism. 203 SPED keypad is not replying to main board Status valid only for units with SPED keypad device installed. 1. Triton Traverse Error Code 917 Make sure the connectors are seated securely on the main board and on the electronic journal. 2. Test the dispenser by completing several test dispenses. 5.

Replace the dispenser is the error persists. 364 Dispenser device offline.

If the voltages are correct, and the cables are undamaged and correctly connected, causes of this error may be a defective cable, a defective printer, printer control board or the main If the symptoms persist after replacing the Electonic Journal replace the CPU Module. 145 Error in reply from Electronic Journal See the Recommended Actions for Error Code 144 146 No reply If the error clears; put the cash dispenser in service. 5. Triton 9100 Error Code 148 Complete the test receipt printer function to determine which if any of the cassettes are not responding.

Clear terminal error code. It will also be stored as part of the transaction data in the electronic journal. Test the dispenser by completing several test dispenses. 4. his comment is here Make sure that note qualifier and the note transport modules are mechanically aligned.

Verify that all access panels are closed and secured. 3. Verify that main board to electronic journal and the electronic journal to dispenser cables securely seated at both ends of the cable. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 119 Diverter in dispense position on start of dispense or learn 1. Inspect all communication cables to make sure they are not damaged and are properly connect to their termination points.

When the note is stuck in between the note transport sensor and the throat.