Home > Error Code > Triton Mako Error Codes

Triton Mako Error Codes

Contents

If it is necessary to check continuity of the cable assembly, refer to Appendix B for pin out of the cable assembly. 3. Remove any unacceptable currency from the cassette. 2. Purge the dispenser using the purge command from diagnostic menu. 2. Verify that the DC voltages to the dispenser are correct. this contact form

Minnetonka, MN 55343 Arizona 2105 N. Inspect electronic journal to dispenser communication cable for damage. Inspect main board to electronic journal communication cable for damage. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. https://prineta.com/atms/docs/atm-error-codes-triton-machines/

Triton Atm Error Codes

Inspect for jammed currency in the feed path and at the Exit sensor. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000119Diverter in dispense position on start of dispense or If these actions have no effect, replace the dispenser.8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT200045Diverter errorThis error occurs when the diverter is in the wrong position during a

  1. Generated Sun, 30 Oct 2016 17:57:45 GMT by s_wx1199 (squid/3.5.20)
  2. Make sure the connectors are seated securely on the main board and on the electronic journal. 2.
  3. ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.7/ Connection to 0.0.0.7 failed.
  4. Check for and clear any foreign matter the note path. 2.
  5. View Unaudited Records.
  6. Reset the cash dispenser by turning OFF the AC power switch for a few seconds and switching it back ON.
  7. Inspect the cassette and feed path for currency that is stuck together or jammed. 3.

Verify that all access panels are closed and secured. Test the dispenser by completing several test dispenses with the test dispense command. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. Triton Error Code 236 Verify that the power supply is operating and the DC voltages being supplied to the main board and dispenser are correct.

If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. Remove the cassette and visually inspect for loose or disconnected connectors on both the upper and lower width sensor printed circuit boards. 3. If the error clears, put the cash dispenser in service. 3.

If the problem persists, replace the dispensing mechanism9600, 9800, RL1600, RL2000, RL5000, RT200057Invalid data commandReset the ATM. Atm Error Codes List Replenish paper as needed. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000114Exit blocked during purge1. Pvt.

Triton Error Code 244

Are you sure you want to continue?CANCELOKWe've moved you to where you read on your other device.Get the full title to continueGet the full title to continue reading from where you Test the dispensing mechanism by completing several Test Dispenses. 3. Triton Atm Error Codes If the error persists, replace the dispensing mechanism. Triton Atm Error Code 151 If these actions have no effect on dispenser operation, replace the dispenser mechanism.

If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. weblink Make sure they are seated at the printer control board and not damaged. 6. Inspect electronic journal to dispenser communication cable for damage. Buy the Full Version triton-errorcodes by Pierre Semaan240 viewsEmbedDownloadRead on Scribd mobile: iPhone, iPad and Android.Copyright: Attribution Non-Commercial (BY-NC)List price: $0.00Download as PDF, TXT or read online from ScribdFlag for inappropriate Atm Error Codes Hyosung

Test the dispenser by completing several test dispenses. 4. Turn the AC power OFF for a few seconds and then back ON to power cycle and reset the cash dispenser. 3. Verify that the diverter moves freely. navigate here Make sure the connectors are seated securely on the main board and on the electronic journal. 4.

The exit sensor may be dirty. Triton Error Code 101 If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. Test the dispensing mechanism by completing several test dispenses.

Refill the cassette as needed. 2.

Check the operation of the diverter solenoid. 3. If the test dispenses pass, but the error returns upon live dispenses, do dispenses with the vault door open. Purge the dispenser using the purge command. Atm Error Code 3-da001 If it is necessary to check continuity of the cable assembly, refer to Appendix B for pin out of the cable assembly 5.

Clean as needed with soft brush and vacuum cleaner. 2. Reject Box or reject Box present sensor may be damaged. Cracked or broken clips should be replaced 4. his comment is here Inspect the printer data cable for damage.

Inspect the cable supplying DC power from the po(more…)8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000140Time-out waiting for printer to be ready1. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000122Unexpected note at exit1. Inspect electronic journal to dispenser communication cable for damage. If no jams are found, remove the note closest the pick rollers in the cassette. 3.

Clear all errors and test the dispenser with a live transaction. Verify that there is only one of each type of cassette installed in the dispensing mechanism. 2. Seat connectors or replace the power supply as needed. 2.