Home > Error Code > Triton Rt2000 Error Codes

Triton Rt2000 Error Codes

Contents

Make sure the connectors are seated securely on the main board and on the electronic journal. 2. Inspect the note transport make sure all belts are on track and there is no currency jammed in the transport or exit areas. If the voltages are correct, and the cables are undamaged and correctly connected, causes of this error may be a defective cable, a defective printer, printer control board, or the main If they are not empty, see corrective action for Error Code 33. 2. http://u2commerce.com/error-code/triton-atm-error-codes-pdf.html

If problems still persist, replace the dispenser mechanism and/or the note cassette. Make sure the connectors are seated securely on the main board and on the electronic journal. 4. Generated Sun, 30 Oct 2016 18:16:35 GMT by s_wx1194 (squid/3.5.20) ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection Make sure the connectors are seated securely on the main board and on the electronic journal. 2.

Triton Error Codes

Inspect electronic journal to dispenser communication cable for damage. Possible wiring, connection or main board problem.9600, 9800, RL1600, RL2000, RL5000, RT200091Dispense sensor failure9600, 9800, RL1600, RL2000, RL5000, RT200092Error in last dispense9600, 9800, RL1600, RL2000, RL5000, RT200093Error in double detect9600, 9800, Verify clearance at the diverter.

  1. Seat connectors or replace the power supply as needed. 2.
  2. Remove any unacceptable currency from the cassette. 2.
  3. Verify the blue lever on the left side of the printer in the print position. 3.
  4. Clear all errors and test the dispenser with a live transaction.
  5. Reset the Cash Dispenser by turning OFF the AC power switch for a few seconds and switching it back ON. 3.
  6. Inspect main board to electronic journal communication cable for damage.

If the problem persists, replace the dispensing mechanism.8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000135Feed sensor blocked as reported by status check1. Inspect electronic journal to dispenser communication cable for damage. If the error clears put the Cash Dispenser into service. Triton Error Code 236 If the error clears put the cash dispenser into service.

Inspect main board to electronic journal communication cable for damage. Triton Error Code 244 Inspect main board to electronic journal communication cable for damage. Verify that all DC voltages applied to the printer control board are correct. http://greengenieatm.com/errorCodes.html Make sure the connectors are seated securely on the main board and on the electronic journal. 4.

Inspect main board to electronic journal communication cable for damage. Triton Error Code 101 If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. Open the printer support bracket and verify that there are no jams in the printer or the paper path. Purge the dispenser using the purge command.

Triton Error Code 244

If these actions have no effect on dispenser operation, replace the dispenser mechanism. Purge the dispensing mechanism with the PURGE command from the DIAGNOSTICS function. Triton Error Codes If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly. 3. Triton Error Code 151 Sales: 1.800.929.0228 SERVICES FOR: Shop Our Online Store EMAIL SALES EMAIL SERVICE About About Us Why Choose Us Products Overview Online Store ATMs Signage Parts Paper Upgrades Special Offers Services

If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. check over here If it is necessary to check continuity of the cable assembly, refer to Appendix B for pin out of the cable assembly. 3. Make sure the connectors are seated securely on the main board and on the electronic journal. 4. Inspect the dispensing mechanism for of damaged components or broken wires. 2. Triton Atm Error Code 33

If the error clears, put the cash dispenser in service. 5. One or more of the four are reporting it is opened. 1. Clear the jammed currency.2. his comment is here Verify the blue lever on the left side of the printer in the print position. 2.

If the problem persists, replace the dispensing mechanism.8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000136Modem initialization failed1. Triton Traverse Error Code 917 Look up the definition on the Hardware Status listing. 4. If the error clears, put the cash dispenser in service. 4.

Remove the cassette from the dispensing mechanism. 3.

If the error clears, put the cash dispenser in service. 5. Generated Sun, 30 Oct 2016 18:16:35 GMT by s_wx1194 (squid/3.5.20) ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.9/ Connection If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. Triton 9100 Error Code 148 Make sure the connectors are seated securely on the main board and on the electronic journal. 2.

Test the dispensing mechanism by completing several test dispenses. Do several test dispense operations. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. weblink If the error does not occur again put the cash dispenser in service.

If the cables are undamaged, the main board or electronic journal may be defective8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000160Electronic journal set featured failed1. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000126Diverter moved to reject position during dispenseInspect for a Open the printer support bracket and verify that there are no jams in the printer or the paper path. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000119Diverter in dispense position on start of dispense or

Inspect the cables connected to CN2, CN3, CN4, and CN5. Other components that may cause this error are the main board or the dispensing mechanism.8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000132Status reports bad double detect in last dispense1. The exit sensor may be dirty. Test the dispenser by completing several test dispenses.

If the currency is in “fit” condition and the error persists, consider replacing the cassette or the dispenser.8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT200034Mis tracked note at double Clear the error. 3. If the error clears put the cash dispenser into service. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support9600, 9800, RL1600, RL2000, RL5000, RT200097Extension exit trailing edge timeoutThe leading edge of the note made it to

Verify that all DC voltages applied to the printer control board are correct. If these actions have no effect on dispenser operation, replace the dispenser mechanism. Make sure the connectors are seated securely on the main board and on the electronic journal. 4. The modem may be defective.8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000165Electronic journal not present1.

If the error clears, put the cash dispenser in service. 5. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000113Timeout waiting for trailing edge at reject1. Remove any jammed currency. 2. If the cables are undamaged, the main board or electronic journal may be defective8100, 9100, 9600, 9700, 9800, Mako, RL1600, RL2000, RL5000, RT2000159Electronic journal test feature failed1.