Home > Transmission Error > Transmission Error On Page 1 Code 0

Transmission Error On Page 1 Code 0

Contents

HP Fax Products - Fax Error Codes and Solutions This document is for HP fax products. This occurs when the line is disconnected or if line conditions degrade during the session. Call the telephone provider if line conditions fail to improve. Turn the power off to the product for 10 seconds, then turn the power back on. Check This Out

Complementary Content ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.7/ Connection to 0.0.0.7 failed. Enable the BFT capability on the remote machine if supported. The power at the remote machine was interrupted, or deliberately turned off causing the fax session to be interrupted. Retry the fax reception when telephone line conditions have improved. https://activefax.wordpress.com/2008/06/10/transmission-error-on-page-1/

Activefax Error Codes

If this is the case, ask the sender to retry a normal transmission from the remote machine. Trackers, as you can see in their URL (in the torrent details) use 2 forms of URL (http: and udp:), and a port number that varies, so it is unlikely that The call waiting service can cause this error.

Error Code(s) Definitions/Causes Solutions 300 The fax session completed without errors. Z7_3054ICK0KGTE30AQO5O3KA30H5 hp-country-locator-portlet Actions ${title} Loading... The remote machine encountered an incompatible feature causing it to terminate the session. Activefax Server No action required. 311 The user of the local machine pressed the Stop key, causing the session to be prematurely terminated before all pages have been sent.

How does HP install software and gather data? Activefax Client Resend at a lower resolution. Under rare conditions, incompatibility between the two machines might cause the remote machine to abandon the call. http://www.actfax.com/en/kbase.html?id=8841 The remote user pressed the Stop key while the reception was in progress.

Before the upgrade and before noticing 2 different wireless addresses I would sometimes go all day without any problems.Well, I guess I'll have to educate myself and dig into the things Activefax Support Call the telephone provider if line conditions fail to improve. Only when you are in the situation that the gps blocker is need you will understand how important and useful such kind of device is. What you are seeing is just coincidence, unrelated events, don't waste your time.Idle/Stalled is not a message, its a state Transmission uses to describe the activity of a torrent: Idle means

  • It doesn't matter if you use Windows, Mac OSX, Linux, Solaris, ...
  • So I switched back to the random port on start up setting and got hit again with the "response code 0" message on some torrents and "could not connect to tracker"
  • Also make sure the remote machine is attempting to initiate a transmission and not a reception. 243 244 The user of the remote machine pressed the Stop key, causing the session
  • The receiving fax machine is an older silent fax machine.
  • If the fax fails when sending to other machines, turn it off for 10 seconds, turn back on, and then try sending again.
  • Top Annabelle Posts: 5 Joined: Tue May 01, 2012 8:12 pm Re: Tracker Response Code 0 Quote Postby Annabelle » Wed May 02, 2012 7:10 pm Thanks, rb07.Since I'm slightly past
  • Older torrents would have peers cached already.
  • Error Code(s) Definitions/Causes Solutions 200 The fax session completed without errors.

Activefax Client

Copyright (c) 2016, ActFax Communication-Software GmbH. For example, the local machine wanted to initiate polling, but the remote machine did not support this mode of operation. Activefax Error Codes This error does not result in the session being terminated immediately. Activefax Troubleshooting We recommend to only use quality modems for fax operation, since low-cost modems usually do not work very reliable in practice.

The remote fax machine determined that there was a feature incompatibility between the two machines and terminated the session. his comment is here If I don't, then can I safely assume there is some form of blocking going on by the wi-fi I am at now? (And if so, is there any way around Otherwise, ask the sender to remove the fax number from the diagnostic check. 226 The remote machine attempted to initiate a remote diagnostic session with this machine. Ask the remote machine user to send at a lower resolution setting. Activefax Logs

These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Try turning on Silent Detect in the Fax settings. Configure the machine to start reception at a lower speed. http://u2commerce.com/transmission-error/transmission-error-on-page-1.html If these transmissions are successful, then notify the user of the remote machine to make them aware of the issue.

When using a version older than 4.05, I would recommend to update the fax server to the latest version (http://www.activefax-distribution.com/e_download.html - it's free). Your cache administrator is webmaster. Older torrents would have peers cached already.

This error is very rare because normally a remote machine does not answer if it cannot receive a document.

Try the fax when telephone line conditions have improved. 440 441 442 443 444 An error occurred during transmission after one or more partial pages were sent. If you want remote polling, confirm that you have correctly configured the local machine for poll transmission. 229 The remote machine attempted to initiate a secure poll transmission from the local Retry the transmission. If the remote machine ends the call just as the local machine starts reception, reduce the ring count on the local machine answering setting.

In other words, one is open to everybody, the other needs a user/password, or another kind of authentication.Annabelle wrote:I'm also having more trouble staying connected since the upgrade.That's probably because the I don't know the details of this.Thanks again. Please try the request again. navigate here Contact the remote caller and have the fax sent again. 222 The local machine answered a call, but is unable to detect the presence of a calling fax machine.

Top Annabelle Posts: 5 Joined: Tue May 01, 2012 8:12 pm Re: Tracker Response Code 0 Quote Postby Annabelle » Wed May 02, 2012 7:31 pm Thanks for all of your The ones Transmission sets seem to be always in the 58000 area when I have checked.