Home > Tsm Error > Tsm Error Number=22

Tsm Error Number=22

Error description The Tivoli Storage Manager server can report the following I/O error during volume dismount processing: ANR8336I Verifying label of ECARTRIDGE volume D12345 in drive T10K-DRIVE1 (/dev/mt1). Retry the failing operation. 211 X'D3' The SCSI bus was busy. If problem persists, perform an AUDIT LIBRARY. 315 X'13B' The destination slot or drive was full in an attempt to move a volume. Cause Errno = 22 indicates an invalid argument, and is symptomatic of the device not being configured with the correct device driver. his comment is here

Temporary fix Comments APAR Information APAR numberIC56431 Reported component nameTSM SERVER Reported component ID5698ISMSV Reported release54S StatusCLOSED PER PENoPE HIPERNoHIPER Special AttentionNoSpecatt Submitted date2008-05-08 Closed date2008-07-03 Last modified date2008-07-03 APAR is To correct this issue, remove the devices and reconfigure them in AIX, then update the device paths within the Tivoli Storage Manager server. Watson Product Search Search None of the above, continue with my search ANR8779E error number=2 when accessing a tape drive on Windows fail i/o error library ERROR_FILE_NOT_FOUND Technote (troubleshooting) Problem(Abstract) An Symptom Examples of messages logged in the server activity log or storage agent console follow :
ANR8840E Unable to open device with error number 2 and PVRRC 2839
http://www-01.ibm.com/support/docview.wss?uid=swg21662937

On AIX, display the errpt to check for hardware errors. 307 X'133' Entry/exit failure Contact Tivoli Storage Manager support. 308 X'134' Entry/exit port not present Contact Tivoli Storage Manager support. 309 Submit feedback to IBM Support 1-800-IBM-7378 (USA) Directory of worldwide contacts Contact Privacy Terms of use Accessibility United States English English IBM® Site map IBM IBM Support Check here to In some cases it may be caused by an incorrect device configuration; for example after upgrading the Tivoli Storage Manager Server without removing and re-configuring the devices at the operating system If the failing operation is not successful, contact Tivoli Storage Manager support.

IBM Atape device driver version 12.6.5.0. 4. Related information ANR8779E error 170 Unable to open drive Document information More support for: Tivoli Storage Manager Server Software version: All Supported Versions Operating system(s): Windows Reference #: 1438554 Modified date: The server does not use append-only mode even if the drive supports the feature. X'6D38' MTIOCLQMID Query the status of the operation for a given message ID.

Submit feedback to IBM Support 1-800-IBM-7378 (USA) Directory of worldwide contacts Contact Privacy Terms of use Accessibility United States English English IBM® Site map IBM IBM Support Check here to It may be necessary to delete and redefine the paths, drives, and library (refer to Technote # 1376419 for assistance) Related information Technote 1376419 Historical Number 1392320 Product Alias/Synonym TSM Document The information below describes updates to the CHECKTAPEPOS option that allow append-only mode to be enabled. When the serial mismatch occurs, TSM attempts to resolve the mismatch with SAN discovery.

If problem persists, perform AUDIT LIBRARY. 318 X'13E' I/O port not configured Contact Tivoli Storage Manager support. 319 X'13F' First destination empty Ensure the volumes have not been rearranged. Refer to the IBM TotalStorage Tape Device Drivers Installation and User's Guide for information on tape library system calls and error description for the library I/O control requests. X'6D37' MTIOCLQ Return information about the tape library and its contents. Configuring drives with persistent naming for IBM devices on AIX Configuring drives with persistent naming for IBM devices on Linux Configuring drives with persistent naming for IBM devices on Windows If

Customer/L2 Diagnostics: None. http://publib.boulder.ibm.com/tividd/td/TSMM/SC32-9090-01/en_US/HTML/anrcms5528.htm See Completion Code and Operation Code Values for a list of completion codes. Temporary fix Comments APAR Information APAR numberIC90259 Reported component nameTSM SERVER Reported component ID5698ISMSV Reported release63A StatusCLOSED PER PENoPE HIPERNoHIPER Special AttentionNoSpecatt Submitted date2013-02-15 Closed date2013-03-04 Last modified date2013-03-04 APAR is Table 5.

This issue can occur with all IBM Device Drivers including the "Mode/Log Sense subpage support" which is actually not used by TSM. On AIX, display the errpt to check for hardware errors. 302 X'12E' Cartridge in failed drive Check the drive for jammed volumes. Append-only mode is a drive-specific behavior and can be enabled each time a tape is mounted. When enabled, the drive issues an error after it receives a command to overwrite any data on the currently mounted volume.

  1. There are two ways that have been identified to work around this problem: 1.
  2. After the driver is properly installed and configured, use the IBM Tape Diagnostic Tool to make sure the tape drives are operational at the operating system level.
  3. Environment Tivoli Storage Manager servers and storage agents running on Windows using Library Sharing.
  4. OP=GETLOGSENSE, ERROR NUMBER=22,CC=0, KEY=05, ASC=24 MAY OCCUR DURING DISMOUNT OF VOLUME AIX A fix is available IBM Tivoli Storage Manager V5.5 Fix Pack 2 (5.5.2) Server Downloads Subscribe You can track
  5. The Tivoli Storage Manager CHECKTAPEPOS server option does not require an append-only capable drive.

Symptom In addition to receiving ANR8779E errors, the overall performance of the tape drive is affected. Watson Product Search Search None of the above, continue with my search Tivoli Storage Manager unable to access IBM library/drive after system reboot tsm devicename change restart Technote (troubleshooting) Problem(Abstract) The Affected platforms: AIX, HP-UX, Solaris, Linux, and Windows. weblink See Operation Code Values for Tape Library Devices for a description of the operation codes.

Possible bad media. For example:
class.c, 3093: T_class.ClassInterpretSenseInfo SCSIOP: SCSIOP_TEST_UNIT_READY
class.c, 3093: T_class.ClassInterpretSenseInfo SCSIOP: SCSIOP_PERSISTENT_RESERVE_OUT
Resolving the problem In this case, the following third-party software programs were Submit feedback to IBM Support 1-800-IBM-7378 (USA) Directory of worldwide contacts Contact Privacy Terms of use Accessibility

Retry the failing operation. 201 X'C9' Device driver failure Contact Tivoli Storage Manager support. 202 X'CA' The device EEPROM failed.

Cause Third-party software that scans hardware and interferes with the tape device driver. Problem conclusion The described problem has been resolved. This will happen when the drive we successfully opened reports a different serial number than what is stored in the TSM database, indicating that the wrong drive was opened. If the failing operation is not successful, contact Tivoli Storage Manager support.

This line shows the failed attempt to overwrite the volume label: 01:42:10.306 [12831][psntpop.c][2876][DetermineResult]: Error performing ALLOWOVERWRITE operation on drive DRIVEX (/dev/rmtxxx); errno = 22 Resolving the problem The problem is outside Completion Code Values Common to All Device Classes Decimal Hexadecimal Description Recommended Action 200 X'C8' The device indicated a failure condition, but sense data was unavailable. Enabled drives will check for data overwrite before each WRITE operation and allow Tivoli Storage Manager to reposition tapes to the correct location and continue with writing data. To be a match for this APAR, it is important that the operation code reported in the ANR8032E message indicates that TSM fails getting the log sense data from the drive

Completion Code Values Common to All Device Classes The following table shows the completion code values, in decimal and hexadecimal numbers, common to all device classes. tsm reserved 170 ANR8311E anr8355e RC 16 during read or write Technote (troubleshooting) Problem(Abstract) A tape is mounted in a drive by a Library Manager. Ensure the DEFINE DRIVE and DEFINE DEVCLASS have been issued properly. 208 X'D0' Command aborted Contact Tivoli Storage Manager support. 209 X'D1' Device microcode failure detected Check the microcode level of I/O Error Code Descriptions for Server Messages This section contains code descriptions for possible I/O error messages from the Tivoli Storage Manager server for the AIX, HP-UX, Solaris, Linux, and Windows(R)

The processes that are invoked by the presence of this software are instances of the WMIPRVSE.EXE image, linked to the Plug and Play service, which cannot be stopped or disabled. The label write attempt fails with the error reported in the problem abstract. The server does not validate the data position on tape. TSMONLY Specifies that the Tivoli Storage Manager server validates data position on tape.

This can occur only with Oracle T10000C drives. Refer to the Tivoli Storage Manager documentation on I/O error code descriptions. It does not apply to non-tape, sequential-access device classes such as FILE or OPTICAL. CC I/O completion code.

Watson Product Search Search None of the above, continue with my search IC57753: ANR8779E WITH ERROR NUMBER=16 WHEN SAN DISCOVERY FAILS OR IS DISABLED. Temporary fix Comments APAR Information APAR numberIC57753 Reported component nameTSM SERVER Reported component ID5698ISMSV Reported release54A StatusCLOSED PER PENoPE HIPERNoHIPER Special AttentionNoSpecatt Submitted date2008-08-27 Closed date2008-09-22 Last modified date2008-09-22 APAR is APAR status Closed as program error. This option is available to automatically correct a device's special file name if it has changed due to changes in a SAN environment.

Table 3. You should refer to the sense byte number along with the value for a complete description of the common values of the ASC and ASCQ codes. Internal server error. Watson Product Search Search None of the above, continue with my search IC90259: ANR8302E I/O ERROR COMPLETING SETMODE FOR LABEL VERIFICATION DUR ING VOLUME DISMOUNT AIX A fix is available IBM

United States English English IBM® Site map IBM IBM Support Check here to start a new keyword search. Tivoli Storage Manager versions 6.3 and 7.1. 3.